MENU
Home > Construction Equipment > Caterpillar Parts > Part NO. 4T2190

4T-2190 / 4T2190 TIP AND TILT CYLINDER LINES GROUP

PART NO.: 4T2190 | 4T-2190

CATALOG: CATERPILLAR PARTS

Parts in 4T-2190
Seq. PART NO. NAME QTY
1 8T-4223 8T4223 / 8T-4223 WASHER-HARD-25.5MM OD X 13.5MM ID X 3MM 0
2 8T-4122 8T4122 / 8T-4122 WASHER-HARD-32MM OD X17MM ID X 3.5MM 0
3 5M-2894 5M2894 / 5M-2894 WASHER CLIP TO TUBE ASSEMBLY (AFTERCOOLER RADIATOR INLET) 0
4 3B-1915 3B1915 / 3B-1915 BOLT STRIP TO TANK 3/8" (9.50MM) X 1 1/4" (32MM) 0
5 0S-1588 0S1588 / 0S-1588 BOLT-PLATE AND ANGLE ASSEMBLY TO HYDRAULIC AND FUEL TANKS 0
6 0L-2070 0L2070 / 0L-2070 BOLT (2-1/4") FILLER TUBE ASSEMBLY TO TRANSFER DRIVE CASE 0
7 0S-1591 0S1591 / 0S-1591 BOLT--BETWEEN CASE AND REAR SUPPORT OF LOADER FRAME 0
8 0T-0102 0T0102 / 0T-0102 BOLT (.375" diameter-.625" long) 0
9 1P-4576 1P4576 / 1P-4576 FLANGE-HOSE ASSEMBLY TO PUMP 0
10 0L-1178 0L1178 / 0L-1178 BOLT BRACKET TO L.H. SUPPORT RAIL 0
11 0S-1621 0S1621 / 0S-1621 BOLT --BRACE TO STARTING ENGINE MOUNTING PAD 0
12 5P-8247 5P8247 / 5P-8247 WASHER (CENTER PUMP TO FRONT PUMP) 0
13 5P-8245 5P8245 / 5P-8245 WASHER-JACKSCREW SUPPORT TO FRONT SUPPORT 0
14 4J-5267 4J5267 / 4J-5267 SEAL .984 mm (.060 in.) I.D. 0
15 5P-8248 5P8248 / 5P-8248 WASHER-ENGINE SUPPORT TO FRAME ASSEMBLY 0
16 0S-1626 0S1626 / 0S-1626 BOLT 1.50 in. (38.1 mm) long 0
17 8D-4348 8D4348 / 8D-4348 BOLT 14.61 cm(5.75 in.) long 0
18 4K-0367 4K0367 / 4K-0367 NUT REAR SUPPORT TO FRAME 0
19 8T-4896 8T4896 / 8T-4896 WASHER (FOR TILT PORTS ON VALVE) 0
20 9S-8752 9S8752 / 9S-8752 NUT 8.33mm(.328 in.)thick 0
21 5S-7382 5S7382 / 5S-7382 BOLT (FOR TILT PORTS ON VALVE) 0
22 6V-8801 6V8801 / 6V-8801 NUT (BRACKET TO RADIATOR GUARD) 0
23 8T-9377 8T9377 / 8T-9377 BOLT (USED WITH 2KD, 3ED, 8FC, 1KD) 0
24 9B-7237 9B7237 / 9B-7237 BOLT 1.25 in. (31.75 mm) long 0
25 8T-4994 8T4994 / 8T-4994 WASHER-HARD (36.5 MM OD) 0
26 8T-9398 8T9398 / 8T-9398 BOLT (3/4-10 X 1.75 IN) 0
27 5P-8167 5P8167 / 5P-8167 BOLT-REMOVEABLE FLOORPLATES 0
28 5P-2228 5P2228 / 5P-2228 BOLT FOR MOUNTING HORN 0
29 7X-0365 7X0365 / 7X-0365 BOLT (3/4 X 10 X 5.437IN) 0
30 7X-0448 7X0448 / 7X-0448 NUT-FULL (5/8 X 11 THD) 0
31 1L-2731 1L2731 / 1L-2731 CLAMP-TUBE 0
32 4J-7655 4J7655 / 4J-7655 CLAMP-HOSE 0
33 8T-9399 8T9399 / 8T-9399 BOLT (3/4 X 10 X 2.25IN) 0
34 5J-0800 5J0800 / 5J-0800 GUARD ASSEM. 0
35 4T-3861 4T3861 / 4T-3861 TUBE AS-RH 0
36 4T-3862 4T3862 / 4T-3862 TUBE AS-LH 0
37 4T-3851 4T3851 / 4T-3851 TUBE AS-RH 0
38 4T-3852 4T3852 / 4T-3852 TUBE AS-LH 0
39 4T-3964 4T3964 / 4T-3964 GUARD-LH 0
40 4T-3963 4T3963 / 4T-3963 GUARD-RH 0
41 4T-3960 4T3960 / 4T-3960 HOSE AS 0
42 4T-3959 4T3959 / 4T-3959 HOSE AS 0
43 4T-6493 4T6493 / 4T-6493 GUARD AS-RH 0
44 4T-6492 4T6492 / 4T-6492 GUARD AS-LH 0
45 4T-6479 4T6479 / 4T-6479 GUARD AS-RH 0
46 4T-6480 4T6480 / 4T-6480 GUARD AS-LH 0
47 4T-8842 4T8842 / 4T-8842 GUARD AS-LH 0
48 4T-8841 4T8841 / 4T-8841 GUARD AS-RH 0
49 4T-2188 4T2188 / 4T-2188 BAR 0
50 108-3030 1083030 / 108-3030 GUARD AS-LH 0
51 108-3031 1083031 / 108-3031 GUARD AS-RH 0
52 4L-9337 4L9337 / 4L-9337 BOLT 3.81 mm(1.50 in.) long 0
PART NO. 4T-2190 / 4T2190 TIP AND TILT CYLINDER LINES GROUP suitable for assembly
PART NO. NAME
4T-1517 4T1517 / 4T-1517 BULLDOZER AR-STRAIGHT
4T-3542 4T3542 / 4T-3542 BULLDOZER AR-UNIVERSAL
4T-3541 4T3541 / 4T-3541 BULLDOZER AR-UNIVERSAL
4T-1516 4T1516 / 4T-1516 BULLDOZER AR-STRAIGHT
4T-1719 4T1719 / 4T-1719 BULLDOZER AR

LATEST PARTS

8F-5809 / 8F5809 WASHER
8F-5816 / 8F5816 WASHER (INSUL)
8F-5825 / 8F5825 NUT
8F-5819 / 8F5819 BLOCK
7F-8476 / 7F8476 LOCKWASHER
5H-1789 / 5H1789 WASHER
9B-8910 / 9B8910 WASHER
1F-0075 / 1F0075 LOCKWASHER